[tourn007]

Bonjour à tous,

voilà plus d'un an que j'utilise mon raspberry type B comme lecteur multimédia associé à un HDD externe de 2To, n'ayant plus de place sur celui-ci, j'ai acheté un WD 6To le : wd60efrx
Mais voilà quand je le branche il n'est pas reconnu. Au départ, je l'ai initialisé sur Windows 8, et il là mon rasp me dit qu'il y a un pb de partition gpt.
Du coup j'ai refait une initialisation avec GParted (live CD), Création d'une table GPT puis création d'une partition en ext4 et une en ntfs.
Je rebranche le disque sur le rasp et voici le résultat d'un fdisk

[email protected]:~$ sudo fdisk -l

Disk /dev/mmcblk0: 7948 MB, 7948206080 bytes
4 heads, 16 sectors/track, 242560 cylinders, total 15523840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000798a3

Device Boot Start End Blocks Id System
/dev/mmcblk0p1 4096 147455 71680 c W95 FAT32 (LBA)
/dev/mmcblk0p2 151552 15523839 7686144 83 Linux

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Disk /dev/sda: 1603.1 GB, 1603128614912 bytes
255 heads, 63 sectors/track, 194902 cylinders, total 3131110576 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sda1 1 4294967295 2147483647+ ee GPT

Du coup je fait un sudo parted -l et voilà
[email protected]:~$ sudo parted -l
Error: Invalid argument during seek for read on /dev/sda
Retry/Ignore/Cancel? i
Error: The backup GPT table is corrupt, but the primary appears OK, so that will
be used.
OK/Cancel? o
Backtrace has 0 calls on stack:


You found a bug in GNU Parted! Here's what you have to do:

Je me demande si le rasp peu supporter un HDD de 6To et si oui que dois-je faire.

Merci d'avance pour vos réponses.

[Dormeur]

je crois qu'il peut gérer au max 4To

[Jeoffrey]

@Dormeur : je n'arrive pas à trouver de réponse claire sur le grand Internet :

http://www.raspberrypi.org/forums/viewto...28&t=15292

http://www.raspberrypi.org/forums/viewto...39#p155739 : ici, y'a un mec qui fait du LVM avec un DD de 8 To.

Note that you cannot use fdisk with a 3TB drive as it does not understand the GPT partitioning scheme.

[Uggy]

Interressant.
Les 2 liens de Jeoffrey semblent bien montrer que la ruse est de passer par LVM.

Cela me semble tout a fait "plausible" que LVM puisse crééer une sorte de couche intermédiaire capable de contourner le problème.

tourn007 -> Passe par du LVM

[tourn007]

Bonsoir,

merci pour vos réponses !

mais lors de l'installation de lvm2 voici ce que j'ai eu :
login as: pi
[email protected]'s password:

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
[email protected]:~$ sudo apt-get install lvm2
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
libpcap0.8 libxmuu1
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
lvm2
0 upgraded, 1 newly installed, 0 to remove and 54 not upgraded.
Need to get 578 kB of archives.
After this operation, 1170 kB of additional disk space will be used.
Get:1 http://archive.raspbian.org/raspbian/ wheezy/main lvm2 armhf 2.02.95-8+rpi1 [578 kB]
Fetched 578 kB in 1s (293 kB/s)
Selecting previously unselected package lvm2.
(Reading database ... 33075 files and directories currently installed.)
Unpacking lvm2 (from .../lvm2_2.02.95-8+rpi1_armhf.deb) ...
Setting up lvm2 (2.02.95-8+rpi1) ...
No volume groups found
No volume groups found
update-initramfs: deferring update (trigger activated)
insserv: Service mountdevsubfs has to be enabled to start service lvm2
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing lvm2 (--configure):
subprocess installed post-installation script returned error exit status 1
Processing triggers for initramfs-tools ...
Errors were encountered while processing:
lvm2
E: Sub-process /usr/bin/dpkg returned an error code (1)
[email protected]:~$ ^C
[email protected]:~$ Get:1 http://archive.raspbian.org/raspbian/ wheezy/main lvm2 armhf 2.02.95-8+rpi1 [578 kB]
Fetched 578 kB in 1s (293 kB/s)
Selecting previously unselected package lvm2.
(Reading database ... 33075 files and directories currently installed.)
Unpacking lvm2 (from .../lvm2_2.02.95-8+rpi1_armhf.deb) ...
Setting up lvm2 (2.02.95-8+rpi1) ...
No volume groups found
No volume groups found
update-initramfs: deferring update (trigger activated)
insserv: Service mountdevsubfs has to be enabled to start service lvm2
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
dpkg: error processing lvm2 (--configure):
subprocess installed post-installation script returned error exit status 1
Processing triggers for initramfs-tools ...
Errors were encountered while processing:
-bash: Get:1: command not found
lvm2
E: Sub-process /usr/bin/dpkg returned an error code (1)

Sachez que je ne suis pas du tout alaise avec Linux, donc n'hésitez pas à développer vos réponses.

Merci d'avance